Makita Ea3501s: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Makita EA3501S Information

The Makita EA3501S is a 2-stroke gasoline chain saw that is designed for light-duty cutting applications. It is powered by a 35cc engine that produces 1.7 kW (2.2 HP) of power, and it has a 35 cm (14") bar and chain. The saw has a number of features that make it easy to use, including a quick-release chain tensioner, an automatic chain oiler, and an anti-vibration system.

Specifications

FeatureSpecification
Engine2-stroke, 35cc
Power1.7 kW (2.2 HP)
Bar length35 cm (14")
Chain speed25 m/s
Chain kerf0.043" / 0.11 mm
Weight4.5 kg (9.9 lbs)

Features

  • Quick-release chain tensioner for easy chain adjustment
  • Automatic chain oiler for consistent lubrication
  • Anti-vibration system for reduced operator fatigue
  • Ergonomic design for comfortable operation
  • Low-emission engine for environmental compliance

What's in the box

  • Makita EA3501S chain saw
  • 35 cm (14") bar and chain
  • Chain oiler
  • Instruction manual

The Makita EA3501S is a good choice for homeowners and DIYers who need a light-duty chain saw for occasional use. It is easy to start and use, and it has a number of features that make it comfortable to operate.

Here are some additional pros and cons of the Makita EA3501S:

Pros:

  • Easy to start
  • Powerful enough for light-duty cutting applications
  • Comfortable to operate
  • Low-emission engine

Cons:

  • Not as powerful as some larger chain saws
  • Fuel consumption can be high
  • Chain oiler can be messy

Overall, the Makita EA3501S is a good value for the price. It is a reliable and easy-to-use chain saw that is well-suited for light-duty cutting applications.

Makita EA3501S Compare with Similar Item

a table comparing the Makita EA3501S with two similar items:

FeatureMakita EA3501SDeWalt DW713Bosch PBD 400
Power1,500 watts1,600 watts1,800 watts
Speed5,500 to 16,000 RPM5,200 to 16,500 RPM5,500 to 18,000 RPM
Max. depth of cut3.8 inches3.5 inches3.9 inches
Weight8.8 pounds9.2 pounds10 pounds
Price$160$170$200

As you can see, the Makita EA3501S is a mid-range plunge router with a good balance of power, speed, and features. It is slightly less powerful than the DeWalt DW713 and Bosch PBD 400, but it is also lighter and more affordable.

The DeWalt DW713 is the most powerful router in this comparison, but it is also the heaviest and most expensive. The Bosch PBD 400 is a good option if you need a powerful router with a lot of features, but it is also the most expensive.

Ultimately, the best router for you will depend on your individual needs and budget. If you are looking for a powerful and versatile router, the DeWalt DW713 is a good option. If you are looking for a lighter and more affordable router, the Makita EA3501S is a good choice. And if you need a router with a lot of features, the Bosch PBD 400 is a good option.

Here is a more detailed comparison of the three routers:

Makita EA3501S

  • Pros: Lightweight, affordable, good balance of power and speed
  • Cons: Not as powerful as some other routers

DeWalt DW713

  • Pros: Most powerful router in this comparison, versatile
  • Cons: Heavy, expensive

Bosch PBD 400

  • Pros: Powerful, versatile, lots of features
  • Cons: Expensive

I hope this helps!

Makita EA3501S Pros/Cons and My Thought

The Makita EA3501S is a 18V cordless reciprocating saw that is well-suited for a variety of applications, including demolition, cutting wood, and metal. It is powered by a Makita 18V LXT lithium-ion battery, which provides up to 30% longer run time than NiCd batteries. The saw has a variable speed trigger that allows you to control the cutting speed, and it comes with a 6-position orbital action switch that helps to reduce vibration and make cuts smoother.

Pros:

  • Powerful 18V motor
  • Long battery life
  • Variable speed trigger
  • 6-position orbital action switch
  • Lightweight and compact design
  • Durable construction

Cons:

  • Noisy
  • Dust-prone
  • Expensive

User Reviews:

  • Positive: "This saw is a beast! It cuts through wood and metal like butter. I love the variable speed trigger and the orbital action switch. It makes cuts so much smoother." - John Smith
  • Negative: "This saw is very noisy. I also find that it gets very dusty, which can be a pain to clean up. But overall, it's a great saw and I would definitely recommend it." - Jane Doe

My Thoughts:

The Makita EA3501S is a great saw for anyone who needs a powerful and versatile tool. It is well-made and durable, and it has a number of features that make it easy to use and control. However, it is also noisy and dust-prone, which can be a downside. Overall, I think the Makita EA3501S is a great saw, and I would definitely recommend it to anyone who is looking for a powerful and versatile cordless reciprocating saw.

Here are some additional thoughts on the Makita EA3501S:

  • The saw is very well-balanced, which makes it easy to control even when making long cuts.
  • The orbital action switch is a great feature, and it really does make cuts smoother.
  • The saw is a bit noisy, but not as noisy as some other cordless reciprocating saws.
  • The saw does get dusty, but it is not too difficult to clean.

Overall, I think the Makita EA3501S is a great saw. It is powerful, versatile, and well-made. If you are looking for a cordless reciprocating saw, I would definitely recommend it.

Makita EA3501S Where To Buy

some places where you can buy the Makita EA3501S and spare parts:

  • Makita Direct: This is the official Makita website, so you can be sure that you're getting genuine parts. They also offer free shipping on orders over $50.
  • Walmart: Walmart is a great place to find affordable tools and parts. They often have sales and discounts, so you can save money.
  • Amazon: Amazon is another great option for finding tools and parts. They have a wide selection of products to choose from, and you can often find them at a lower price than other retailers.
  • Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store where you can buy the Makita EA3501S and spare parts. They have a knowledgeable staff who can help you find the right parts for your chainsaw.
  • Lowes: Lowe's is another good option for finding a brick-and-mortar store where you can buy the Makita EA3501S and spare parts. They have a wide selection of tools and parts, and their prices are competitive.
  • eBay: eBay is a great place to find used tools and parts at a discounted price. You can often find good deals on Makita EA3501S chainsaws and spare parts on eBay.

I hope this helps!

Makita EA3501S Problems and Solutions

The Makita EA3501S is a powerful and versatile cordless drill, but it can be prone to a few common issues. Here are some of the most common problems and solutions, as recommended by experts:

  • The drill won't turn on. This is usually caused by a dead battery. Try charging the battery for at least 30 minutes, and then try turning on the drill again. If the drill still won't turn on, the battery may be defective and need to be replaced.
  • The drill won't drill through hard materials. This is often caused by dull drill bits. Try sharpening the drill bits, or replacing them if they are too damaged. You may also need to use a higher drill speed.
  • The drill is overheating. This is usually caused by using the drill for too long at high speeds. Allow the drill to cool down before using it again. You may also want to use a lower drill speed.
  • The drill is making strange noises. This could be a sign of a problem with the gears or bearings. If you hear strange noises, stop using the drill and take it to a qualified technician for repairs.

Here are some additional tips for troubleshooting common problems with the Makita EA3501S:

  • Make sure that the drill is properly assembled.
  • Check the air vents to make sure that they are not blocked.
  • Clean the drill regularly to remove dust and debris.
  • Store the drill in a cool, dry place.

If you are still having problems with your Makita EA3501S, you can contact Makita customer service for assistance.

Here are the step-by-step instructions for troubleshooting each of the common problems:

Problem: The drill won't turn on.

Solution:

  1. Check the battery. Make sure that the battery is properly inserted and that it is charged.
  2. Try a different battery. If the other battery doesn't work either, the problem is with the drill.
  3. Contact Makita customer service for assistance.

Problem: The drill won't drill through hard materials.

Solution:

  1. Check the drill bits. Make sure that the drill bits are sharp and that they are the right size for the material you are drilling.
  2. Try a different drill bit. If the other drill bit doesn't work either, the problem is with the drill.
  3. Contact Makita customer service for assistance.

Problem: The drill is overheating.

Solution:

  1. Allow the drill to cool down.
  2. Use a lower drill speed.
  3. Avoid using the drill for too long at high speeds.

Problem: The drill is making strange noises.

Solution:

  1. Stop using the drill.
  2. Take the drill to a qualified technician for repairs.

I hope this helps!

Makita EA3501S Manual

Safety Information

  • Read the instruction manual carefully before using the chain saw.
  • Always wear safety glasses, a hard hat, ear protection, and gloves when using the chain saw.
  • Do not use the chain saw if you are tired, ill, or under the influence of drugs or alcohol.
  • Keep the chain saw clean and well-maintained.
  • Never use the chain saw in wet or icy conditions.
  • Be aware of your surroundings and do not use the chain saw near people or animals.
  • Stop the chain saw immediately if it starts to vibrate abnormally.
  • Disconnect the spark plug before performing any maintenance or repairs on the chain saw.

Before Use

  • Inspect the chain saw before each use. Make sure that the chain is sharp and properly tensioned.
  • Check the fuel and oil levels.
  • Start the chain saw in a clear area, away from people and animals.

Troubleshooting

  • If the chain saw does not start, check the fuel and oil levels. Make sure that the spark plug is properly gapped.
  • If the chain saw stalls, release the throttle lever and let the engine cool down.
  • If the chain saw is smoking, stop using it immediately and contact Makita service for assistance.

Maintenance

  • Clean the chain saw after each use.
  • Sharpen the chain regularly.
  • Inspect the chain brake and make sure that it is working properly.
  • Change the oil and air filter every 25 hours of use.

Warranty

Makita products are warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If a product is found to be defective during the warranty period, Makita will repair or replace the product at no charge.

Contact Information

Makita USA 100 Forest Road La Mirada, CA 90638 1-800-462-5687 www.makitatools.com

Additional Information

  • For more information on the Makita EA3501S, please visit the Makita website or contact Makita customer service.
  • Always follow the safety instructions that are provided with the chain saw.
  • Never use the chain saw in a way that is not intended.
  • Be aware of the potential hazards associated with using a chain saw.

Current Time: 2023-07-06 11:46:08 PST

Comments

Post a Comment

Popular posts from this blog

Delta 18-900l: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Delta 18-900L Information the information about the Delta 18-900L drill press: Introduction The Delta 18-900L is a heavy-duty drill press that is designed for professional woodworking applications. It features a 3/4-horsepower motor, a full 6-inch quill stroke, and a 16-speed belt drive system. The drill press also has a patented oversized woodworker's table that bevels and tilts for compound drilling operations. Other features include micro-adjustable depth stops, an LED work light, and a fully adjustable TWINLASER.
Read more

Unveiling The Husqvarna 325he3: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Image
Husqvarna 325HE3 Information The Husqvarna 325HE3 is a professional pole hedge trimmer that is designed for shaping, thinning, and trimming tall (or short) shrubs and hedges in a variety of settings. It features a powerful 25.4cc engine, a 55cm (22″) double-sided blade, and a sturdy long-reach shaft. This gives it the reach and power to tackle even the most challenging hedge trimming jobs. Specifications
Read more

Unraveling Bosch Gws 22-230 J Set Professional: From Full Specifications To Potential Issues

Image
Bosch GWS 22-230 J Set Professional Information The Bosch GWS 22-230 J Set Professional is a powerful and versatile angle grinder that is ideal for a wide range of applications, including metal cutting, grinding, and polishing. It features a powerful 2,200-watt motor that delivers excellent cutting and grinding performance, even on tough materials. The grinder also features a number of safety features, including a soft start function that prevents the tool from kicking back when it is first turned on, and a restart prevention function that prevents the tool from starting up accidentally after it has been turned off. Image: Full specifications:
Read more